18 GOLD FIREGLASS BURNER KIT Fireplace Gas Log FirePit, 15 Lbs Gold, 35 Lbs Base
January 26, 2018 admin 0 Comments
To your gas fireplace or fire pit. A modern alternative to gas logs! Fire-glass has a mirrored surface that is highly reflective, and sparkles even when fire isn’t burning! In this package you will get. 18″ SS H Burner, Connector Kit, plus damper clamp (burner size 18×6″). You need to have a gas source. To create the flame. The glass does not actually burn! This KIT is for vented, natural gas, wood-burning-rated fireplaces only! This kit contains only what is pictured (glass, burner, connector and clamp) which is enough for most fireplaces. If your fireplace or your local code requires use of some additional items like regulator, valve, safety pilot, remote control, etc. Included burner can be used if allowed and if it conforms to your local Safety Code (which may require additional parts not included in this H burner kit), and only in fully vented, noncombustible fireplace with damper and chimney fully opened and free of any obstructions. (And if it can be used, you need to respect the recommended size and amount of fireglass). For your safety, it is recommended to have gas burners and/or fireglass products installed by an experienced professional. About Fireglass: Fireglass is used in gas fireplaces and fire pits as an alternative to gas logs. The glass does not actually burn, so. Glass sizes are approximate. Some pieces can be quite smaller and some can be quite larger, this is typical of all kinds of fireglass. The shade/hue of the glass can change dramatically in different sources of light as well as in different colors of surrounding areas, backgrounds, etc. The image of this glass may be distorted by the settings of your viewing screen. To calculate how much glass you need. For rectangular or trapezoidal fireplace/fire pit: 1 Measure the width across the center of the firebox (in inches). 2 Multiply the result times the depth (inches) from the front to the back. 3 Divide the result by 20.5 4 Multiply the result by the number of inches high you would like the glass which should be at least enough to cover the top of your burner. 5 The result is the number of pounds needed (approximately). For round fire pits: 1 Divide the diameter (in inches) by 2. 2 Square the result. 3 Multiply the result by 0.15. 4 Multiply the result by the number of inches deep. 5 The result is the number of pounds needed (approximately). Note that 7.5 lbs of glass gives you a 1 inch layer covering 1 sq. Multiple packages do not always arrive on the same day. So please be patient with them, and thank you for understanding! For more colors and amounts, fireglass burners, and fire pit rings! Please seek the help of a professional, as it can be very dangerous if not properly installed. By the NFI (National Fireplace Institute). The installer must conform to any and all state or local codes. It is the installers responsibility to ensure a safe installation and educate the end user as to proper operation. The item “18 GOLD FIREGLASS BURNER KIT Fireplace Gas Log FirePit, 15 Lbs Gold, 35 Lbs Base” is in sale since Sunday, December 06, 2009. This item is in the category “Home & Garden\Home Improvement\Heating, Cooling & Air\Fireplaces & Stoves\Fireplaces”. The seller is “allfireglass” and is located in San Diego, California. This item can be shipped to United States.
- Dominant Color: Gold
- Material: Glass
- MPN: Fireglass
- Brand: FGSD